Evinrude Parts There are 2 products.

  • Impellers Evinrude

    Evinrude outboard motor impellers (BRP) buy

    Power Watersports supplies impeller kit of high quality and that is why we give also a year warranty on all Evinrude impeller kits!

    Impeller kit

    At Power Watersports are you to the right place for buying a Evinrude impeller kit. Our online water sports shop allows you to create this quick and cheap to buy. With our 20 years of experience in water sports, we are able to provide for you the most quality parts for your Evinrude outboard motor to choose from. Because we buy-in directly at the water sports wholesaler we can offer your outboard-parts cheap.

    Order your impeller kit

    An order is at Power Watersports very simple. In just a few steps to get to the confirmation of your order and this leaves very quickly from our warehouse. The payment of your order is done in a secure internet environment that manages by Datact.

    Mounting your impeller kit

    If you prefer your Evinrude outboard motor impeller kit prefer not places you can always come to us. That way, you can be sure that your new parts be placed correctly.

    Delivery of your impeller kit

    Also the supply is good. For shipping within the Netherlands you pay only from €6.95 and for shipping to the rest of the EU from €8.95. From an order amount of €100 is the shipping free. The delivery is done through recognized carriers such as GLS.

  • Starter motor Evinrude

    Starter motor Evinrude outboard motor (BRP) buy

    Power Watersports supplies high quality starter motors and therefore we also give a one year warranty on all Evinrude (BRP) starters!

    Starter motor

    The starter motor ensures that your Evinrude BRP outboard motor is going around. This transfer comes in stand by a gear on the starter wreath together. Together with the petrol and air supply will be the Evinrude BRP outboard engine in a few strokes on their own further turning. The power that is released is average around 1.4 kW.

    Order your starter motor

    Part order is at Power Watersports very simple. In just a few steps to get to the confirmation of your order and leaves in this short time from our warehouse. The payment of your order is done in a secure internet environment that manages by Datact.

    Replace starter motor

    When you prefer not to place your starter motor you can always come to us. That way, you can be sure that your new parts be placed correctly.

    Delivery of your starter motor

    Also the supply is good. For shipping within the Netherlands you pay only from €6.95 and for shipping to the rest of the EU from €8.95. From an order amount of €100 is the shipping free. The delivery is done through recognized carriers such as GLS.
  • Trim/Tilt Evinrude

    Tilt trim Motor Evinrude outboard motor (BRP) buy

  • Boat Screw Evinrude

    Boat screw propeller Evinrude outboard motor (BRP) buy

    3-bladed or 4-blade propeller for your Evinrude outboard motor

    Most Evinrude outboard motors are standard of a 3-bladed propeller. In most cases, that also the best result in the combination of slip in acceleration at low engine speeds and good grip at top speed.

    As much grip at low engine speeds is desired, for example, to wakeboarding or water skiing, a 4-blade propeller benefits. This will boot faster respond to gas with the throttle. That is especially important at the start, but also the speed is

    better.

    What is the diameter of a Evinrude boat
    The propeller diameter is the distance between the imaginary circle that wraps around all the propeller blades.

    What is the Pitch of an Evinrude outboard motor screw?

    Pitch is the theoretical distance a Honda propeller travels with each rotation. For example; a 21 boat screw pitch would be a boat at each rotation 21 inch (2.54 x = 53.34 cm) have to move on, assumed that there is no slip

    What is the difference between a left-turning or dextrorotatory Evinrude

    In most cases, in boats with a single outboard motor a legalTurning screw used. Left-turning propellers are used in the Assembly of double motors for better handling characteristics.

    How do I choose my boot screw?

    By default, an Evinrude outboard motor comes with a so-called standard screw. This one is so chosen that he meets in combination with most boats behind which the Evinrude outboard motor mounted.

    The most important factor for the match between the Evinrude outboard motor and the boat is the pitch of the propeller. That determines the ratio between the engine speed and the speed of the boat. The pitch is the distance a propeller moves when he finds himself one rotation by the water "unscrew". A boat screw with flat blades made a short distance. If the sheets are placed schuiner is that distance is greater. In a comparison with the data of a car can say that the boat at a small prosperity in a lower gear than if the propeller is a matter of urgency. That affects the speed of the boat at an engine speed, but also on

    the pull.

    Om to choose the right propeller must first be measured whatever speed the engine is running at top speed. Then the speed recommended by the manufacturer in the work area. Usually that's anywhere between 5000 and 6000 RPM. It is recommended also to measure the top speed with a GPS.

    You go for a maximum speed, then het engine speed in the direction of the maximum value within this area. The measured speed is lower than the indicated operating range then there should be a screw with a smaller emergency boat. After mounting the new prop will be the top speed achieved more quickly: the pull is at the same time larger. In addition, the top speed despite the smaller prosperity often slightly higher, because the outboard engine in its optimal working speed. Of course, after changing the propeller always check if the outboard motor at top speed in the specified rows. Conversely, a boat screw with greater prosperity the solution when the engine at top speed makes too many revs.

    The table below gives roughly to the impact on the speed as the pitch of the propeller. This is related to HP-class of the Evinrude outboard motor.

    Number Of Hp

    Difference in prosperity between the Evinrude Screw

    Speed difference per measure

    300 HP

    2 inch

    500-600 rpm

    200-250 HP

    2 inch

    500-600 rpm

    70-175 HP

    2 inch

    500-600 rpm

    40-60 HP

    1 inch

    350-450 RPM

    8-20 HP

    1 inch

    500-600 rpm

     

    That also means that the choice of the emergency depends on the intended use of the boat. If the boat is only used to quietly revving it might be more comfortable to a propeller with a slightly larger prosperity to choose (1 size larger). The engine speed remains lower, the boat is more economical and the buitenboordmotor engine is quieter.

    Conversely, it can be useful for water skiing to choose a smaller emergency: the outboard motor then turns more revolutions and has more pull. The top speed is limited because the outboard motor at it's maximum speed is bounded.

  • Head Gasket Evinrude

    Buy outboard motor Evinrude head gasket (BRP)

  • Branstofpomp Evinrude

    Buy outboard motor Evinrude fuel pump (BRP)

  • The Throttle-Evinrude

    Buy the throttle-Evinrude outboard motor

    • Throttle-cable/remote control cables Evinrude outboard motor
    • Calculate the cable length A + B + C
    • A: Measurement from the control cabinet to the rear boot
    • B: Measuring rear boot to the outboard motor
    • C: 50 cm extra charge for the friction (driving the outboard motor)
  • Electronics Evinrude

    Inflammation, electronics, ignition coil, trigger, stator, spark plug Evinrude (BRP) buy

  • Dead Man's Button Evinrude

    Dead man's button and dead man's cord Evinrude outboard motor (BRP) buy

  • Evinrude Carburetor

    Carburetor parts Evinrude BRP buy outboard motor

  • Filters Evinrude

    Gasoline and oil filters buy outboard motor Evinrude (BRP)

  • Anode Evinrude

    Anodes Evinrude outboard motor (BRP) buy

  • Crankshaft Parts Evinrude

    Crankshaft parts Evinrude outboard motor (BRP) buy

  • Tailpiece Parts Evinrude

    Tailpiece Parts Evinrude outboard motor (BRP) buy

  • Connector Evinrude

    Gasoline, and fuel plugs connectors Evinrude (BRP) buy

  • Thermostat Evinrude

    Thermostat Evinrude outboard motor (BRP) buy

  • Evinrude Motor Gasket Sets

    Gasket set for Evinrude (BRP) buy

  • Aerosol paint Evinrude

    Paint original Evinrude outboard motor (BRP) buy

  • Gashendel Boot Kabels
Showing 1 - 2 of 2 items
Showing 1 - 2 of 2 items